影响LED筒灯寿命因素及外壳选购

为了追求更完美人们研发了一种超薄的LED筒灯外壳，无论外形还是功能都是更胜一筹的。超薄LED筒灯外壳是应用新型LED照明光源在传统筒灯基础上改良开发的产品，与传统筒灯外壳对比具有以下优点：节能、低碳、长寿、显色性好、响应速度快。超薄LED筒灯的设计更加的美观轻巧，安装时能达到保持建筑装饰的整体统一与完美，不破坏灯具的设置，光源隐藏建筑装饰内部，光源不外露，无眩光，人的视觉效果柔和、均匀。 

目前，在古镇，灯饰企业只需花10元钱，就可以通过互联网上传一张灯饰外观设计图纸，由知识产权快速维权中心盖上一个虚拟的“时间戳”，凭这个“时间戳”，外观设计专利保护就有了说法。古镇科技办公室主任黄志桐说，“过去外观专利的申请差不多要一年时间，但有了快速维权中心，15天就可以登记一个专利，使企业的知识产权得到更有效的保护。资金支持其实并不是最重要的，政府部门对企业的最大帮助，是做好企业做不了的事。”因此，古镇灯饰企业的维权意识渐强，抄袭之风一去不返，许多厂家希望变仿造为创造，打出自己的品牌。

Micro Coreless Motor product introduction:

Micro Coreless Motor in structure broke through the traditional motor rotor structure, USES is no rotor, also called the hollow rotor cup type.Hollow cup motor with brush and brushless divides into two kinds, brush with hollow cup motor rotor iron core, without brush hollow cup motor stator iron core.Winding adopts delta connection.

Function:  fast speed, suitable for aircraft model, electric toothbrush,USB fan and other products.

Characteristic: the volume is 6MM 7MM fast.
Features: small size, fast speed, dc high speed motor starting voltage 0.6v is not possible for other motors.Wear shaking head, strong vibration feeling.

Operating temperature range:

Micro Coreless Motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a Micro Coreless Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.

Storage temperature range:

Hollow cup motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.

Service life:

The longevity of hollow cup motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.

●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.

when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant  with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department  to service to you Looking forward to your inquiry. Welcome to our factory.

Micro Coreless Motor

Micro Coreless Motor,Micro Coreless Dc Motor,Low Speed Micro Coreless Motor,Micro Geared Coreless Motor

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com