Longda Electronics will present the world's first high-efficiency LED yellow light tube for clean room in Hong Kong International Autumn Lighting Fair

A full range of new LED lighting applications, debuted at the Hong Kong International Fall Lighting Fair

Ronda Electronics released a series of new LED lighting applications, including the world's first high-efficiency yellow LED fluorescent tube for clean room, ultra-high brightness 2,600 lumen LED fluorescent tube, ultra-light super bright 1000 lumen LED bulb, and The color temperature flat panel module and other products will be unveiled at the 2010 Hong Kong International Autumn Lighting Fair held at the Hong Kong International Convention and Exhibition Center from October 27th to 30th, demonstrating the diversity of Lunda Electronics' LED lighting applications. Sex and technical strength.

The products exhibited by Ronda Electronics include LED fluorescent tubes, LED bulbs/downlights, LED panel lamps and COB light source modules.

LED fluorescent tube series:

In the LED fluorescent tube section, the world's first high-efficiency yellow LED fluorescent tube for clean room is exhibited. The technology of special LED with special filter material tube can filter the wavelength below 500 nm (nm). It is twice as high as the yellow light tube made of amber LED on the market, which meets the lighting requirements of various workshops and clean rooms. Since the factory needs to light up for a long time, the LED lamp can save 50% of the electricity compared with the traditional fluorescent tube. It can be calculated by 24 hours lighting. If 100 LED lamps are installed, the electricity cost can be reduced by NT$6,000 per month. Up to 40,000 hours, 7-10 times that of traditional lamps. Another high-efficiency LED fluorescent tube with an ultra-high brightness of 2,600 lumens, with a lamp efficiency of more than 100 lumens per watt (100 lm/W), and a high-brightness design extends its application to high-profile commercial locations such as halls and factories. In addition, Ronda has exhibited an ultra-light plastic LED tube with a weight of only 175g, which is a breakthrough for the company's R&D team in the field of LED lighting applications.

LED bulb / downlight series:

In the light bulb series, Ronda is the first to replace the traditional 100-watt incandescent bulb with an ultra-light, ultra-bright 1,000-litre LED bulb. The product consumes 12 watts of electricity, which is 88% less than conventional light bulbs. At the same time, it uses a non-metallic heat-dissipating lamp housing to reduce the weight of the bulb to less than 140g, making it easier for users to install and erecting the same type of bulb products in the industry. A new generation of specifications. In addition, this time more display of a variety of dimmable LED light sources, including a thickness of only 2 cm, with a remote control dimmer dimmable light module, and a 4.5 watt dimmable light bulb, showing Ronda in the field of lighting Comprehensive technology development.

LED panel light series:

With its long-term research and development technology in the field of panel backlighting, Ronda applies the precision technology of LED backlight to lighting products. This time, the 60 X 60 LED panel light with color temperature can be displayed, with remote dimmer, which can be warmed from white. By the cool white light, the color temperature can be controlled without delay, and the user can freely adjust the color temperature according to different occasions, time and mood to create different situational atmosphere. The light emitted by the LED panel light is a soft secondary light source, which creates a stable and soft space lighting effect for offices, hospitals, schools and shopping malls.

COB light source module series:

In addition to lighting applications, Longda Electronics' COB (Chip On Board) integrated package technology light source module is also an important core component in LED lighting products. This time, the ultra-high brightness 70 watt COB was exhibited, and the brightness was 8,000 lumens. A variety of COBs of 4 watts, 6 watts, 10 watts, 70 watts and 100 watts are also on display, ranging from low-intensity bulbs to high-brightness patio lights, street lights, and projection lights. High stability, long life and versatility.

Dr. Su Fengzheng, Chairman and General Manager of Ronda Electronics, said that the series of new products exhibited at the Hong Kong Lighting Fair are both in line with international manufacturers and show the full range of Ronda electronics in the field of lighting. Orientation technology layout. Longda Electronics' lighting product research and development team actively develops in two areas of LED lighting source and lighting module, providing customized solutions for different markets and customers, including providing international OEM, ODM services, and providing lamps. Total Solutions for Source Modules.

About Ronda Electronics

Longda Electronics Co., Ltd. (3698) is a subsidiary of BenQ AUO Group. It was established on May 23, 2008. It is the only professional manufacturer of Light Emitting Diode (Epi) and Chip (Chip) in Taiwan. Companies, packaging, lighting strips to energy-saving and intelligent lighting products, its product range includes LCD backlights, commercial lighting sources, consumer lighting sources and various lighting fixtures. Lunda Electronics officially merged with Kaiding Technology in March 2010. It currently employs 2,100 people and is headquartered in the Science and Technology Park of Hsinchu City. The manufacturing base includes Taiwan's Hsinchu Science Park, Hukou Industrial Park and Zhunan Science Park, which will expand in the future. To the mainland of Suzhou.

Printed Circuit Board assembly sometimes called PCB Assembly(PCBA).
The bare board is populated with Electronic Components to form a functional. In through-hole technology, the component leads are inserted in holes surrounded by conductive pads; the holes keep the components in place. In surface-mount technology (SMT), the component is placed on the PCB so that the pins line up with the conductive pads or lands on the surfaces of the PCB; solder paste, which was previously applied to the pads, holds the components in place temporarily; if surface-mount components are applied to both sides of the board, the bottom-side components are glued to the board. In both through hole and Surface Mount, the components are then soldered; once cooled and solidified, the solder holds the components in place permanently and electrically connects them to the board.

Pcb Assembly

PCB Assembly

PCB Assembly,PCB Circuit Board ,Electronic PCB Assembly,Professional PCB Assembly

Orilind Limited Company , http://www.orilind.com

This entry was posted in on