The conference attracted more than 160 spectators, most of whom were senior executives and government agencies from LED companies in Jiangsu. Gaogong LED Zhang Xiaofei, Nanjing Economic and Technological Development Zone Management Committee/Nanjing Flat Panel Display Industry Association Xu Zhiguo, Ke Rui China Tang Guoqing, Najing Optoelectronics Liang Bingwen, Zhongjing Kechuang Zhongqun, Nanjing North Huihua Sangxia, Nanjing Street Light Management Office Liu Leishi, Philips Lumileds Zhou Xuejun and Shifu Photoelectric Cai Ming delivered a wonderful speech. Ni Delong, deputy secretary of the Party Working Committee of Nanjing Economic and Technological Development Zone, delivered a speech on behalf of the government.
Zhongjing Kechuang Zhongqun: How to design LEDs suitable for lighting
Dr. Zhong Qun, general manager of Shenzhen Zhongjing Kechuang Optoelectronics Technology Co., Ltd. pointed out that with the continuous improvement of LED lighting technology, people's requirements for LED lights are getting higher and higher. From the very beginning, it can light up (salvation problem)-->Power saving, saving money, environmental protection, no stroboscopic (health problems)-->Meet the physiological and psychological requirements of people, and achieve a harmonious state of light and environment (enjoy problem). LED lighting is constantly evolving, facing the war of traditional and LED lighting. At the same time, Zhongqun summarized the energy saving: 1. The energy conversion efficiency of the LED device is high; 2. The lower forward voltage; 3. The high light efficiency of the package; 4. The junction temperature is low under the working condition; 5. The light distribution is reasonable and effective. High illumination rate; 6, high power efficiency; 7, intelligent control. Finally, Zhong Qun conducted a comparative analysis of LED and natural light illumination.
Dr. Zhong Qun, General Manager of Shenzhen Zhongjing Ketron Optoelectronics Technology Co., Ltd.
Copper Alloys Brazing rods Welding Rod . Copper Alloys brazing rod are suitable for gas-flame brazing ,high temperature brazing ,salt bath dip brazing of copper and copper alloys ,nickel, cast iron and hard alloys .While brazing by oxyacetylene, heat ing with oxidized flame quickly can lessen evaporation of Zinc and prevent gas porosity due to over-oxidization. Copper and Zinc alloy, widely used to braze carbon steel, cast iron, hard carAlso Name:Brass welding wire.WELDING ROD:Square rod and Round rod.Most popular for padding material of Gas-welding and ARC welding in brass. Can also used in gas welding of copper, steel, copper-nickel, cast tion and cemented carbide alloy tools incrustation.Recommended for the joining welding of copper with CU-Sn alloy. Best for the joining welding of Cu-Zn alloy with steel. Pre-heart suggested for the large size products and pulsed ARC welding is recommended for multilayer on steel.
Welding Rod
Welding Rod,Arc Welding Rods,Copper Alloy Welding Rod,Aluminum Welding Rods
ZHEJIANG ICE LOONG ENVIRONMENTAL SCI-TECH CO.,LTD. , http://www.china-refrigerantgas.com