Vivo launched the X9/X9 Plus, which is based on the self-timer. Its front-facing dual camera design subverts the idea of ​​"main selfies = algorithmic tricks". The X9/X9 Plus is equipped with a front-mounted 20 million + 8 megapixel dual camera. With the new generation of Moonlight soft light, it fully meets the needs of self-portrait users on the hardware. And today, we bring the real machine disassembly of the vivo X9.
Configuration parameter
In terms of configuration, the vivo X9 is equipped with a Qualcomm Snapdragon 625 processor with a 4+64GB memory/storage combination and a 5.5-inch Super AMOLED screen with 1080p resolution. The battery capacity is 3050mAh and supports 9V/2A fast charge. The camera is a front-mounted 2000W+800W pixel dual camera, both apertures are F2.0, with a Moonlight soft light, rear set to 1600W pixels, support phase focusing. In addition, X9 also built a AK4376 independent chip, support dual card dual standby full Netcom, running Funix OS 3.0 based on Android 6.0.
Detailed disassembly
The vivo X9 adopts a full metal body design, and the middle frame is fixed with a plum screw at the bottom, and the other parts are buckled according to the routine.
However, the author struggled to separate the metal back shell from the middle frame, and carefully saw a layer of 3M sealant at the joint. It is effective in preventing the infiltration of moisture in daily use, and the treatment in this detail is obviously better than many mobile phones.
The inner side of the metal back shell is covered with a layer of thermally conductive graphite.
At the bottom of the Type-C port, the earphone mouth has a rubber ring filling gap, which can avoid the loosening of the plugging to a certain extent.
There is also a circle of foam wrap around the battery.
Next, the motherboard part is disassembled, and the part of the SIM card slot that is in contact with the main board is fixed by a metal bracket, and the surface is also covered with waterproof foam. It is worth mentioning that the SIM card holder also has a ring of rubber, which has a certain sealing effect when the Cato is inserted into the mobile phone, and plays a role in waterproofing the life.
The surface of the battery and the main board is covered with a graphite heat conducting layer, and after tearing, the metal bracket for fixing the BTB can be seen.
There is also a foam surface under the metal bracket for filling, and the details are quite close.
The BTB seat is surrounded by waterproof foam to prevent moisture from infiltrating into the socket to some extent.
The slotted portion of the X9 metal middle frame acts as a signal shield and is internally covered with a thermally conductive graphite sheet.
Then continue to disassemble the sub-board and speaker section.
After removing the speaker module, we can see the sub-board and the FPC with integrated Typc-C port. The Typc-C port/3.5mm headphone port has rubber ring wrapping, which will play a certain role in dustproof and waterproof after filling the gap.
The sub board integrates the microphone module.
In order to replace the battery, the vivo phone is accustomed to add 2 handles in the battery part, and we can see this design on the X9, tearing open and picking up the battery.
Vivo X9 built a 3050mAh battery, support 9V/2A fast charging technology.
Heat the FPC part of the bottom plate with a hot air gun. After the hot melt adhesive softens, it can be separated from the middle frame. After separation, we can remove the bracket of the Home button (the bracket is fixed with 3 screws).
It is worth mentioning that the home button of the vivo X9 has a rubber film inside to prevent liquid from penetrating from the Home button.
The main board is covered with two types of shields, which are open and disassembled, easy to repair double shields and non-removable, welded single-layer shields for reduced thickness. The shield surface of the main chip has a heat conductive copper foil.
The front lens can be said to be the biggest feature of the vivo X9. It is currently one of the few mobile phones with front-facing dual cameras. It is equipped with 20 million pixels (main camera, the world's first IMX376 sensor) + 8 million pixels (recording depth information) With the F0.95-F16 electronic aperture, you can choose a shallow depth of field effect comparable to SLR shooting. The physical aperture of the front lens is F2.0, and it has a well-received self-timer soft light on the X7.
The rear camera is 16 million pixels, supports PDAF phase focusing technology, has F1/2.8 aperture, and covers the outermost lens surface with more scratch-resistant sapphire lenses.
Vivo X9 disassembly summary
In general, the disassembly of the vivo X9 is not very difficult, but the separation of the rear and middle frames requires more patience.
In terms of workmanship, the vivo X9 is quite sincere. A large number of waterproof foams are applied to the metal back shell, the edge of the battery compartment, and the edge of the SIM card slot to prevent liquid infiltration in daily use. These seemingly insignificant designs. It has greatly enhanced the waterproof splash of the X9. In addition, the internal components of the X9 are more reasonable. The FPC integrated Type-C port on the sub-board is a good space for the battery compartment. The motherboard uses two shields to ensure cost and maintainability. .
In the market environment where smartphones are severely homogenized, vivo has come out of a completely different path of differentiation with front-mounted dual-camera X9 and X9 Plus. This innovative spirit is worthy of recognition. Now the vivo X9 is 2498 yuan, and interested friends can pay more attention.
- USB-C Hub (5-in-1): Extend one 4K UHD HDMI port, two supper speed USB 3.0 ports, one SD menmory card slot and one TF momory card slot from one USB-C/thunderbolt 3/ type c port
- 4K Video USB-C To HDMI Adapter: Mirror or extend your screen with USB C Hub HDMI port and directly stream 4K UHD @ 30Hz or Full HD 1080p video to HDTV, monitor or projector
- Super Speed USB 3.0 Ports(At Full-Speed): Allow you to connect keyboard, mouse, hard drive,etc to MacBook Pro,Up to 5Gbps data transmission speed, down compatible with USB A 2.0 and below. Because HDD/SDD needs more power, so this adapter only allow connect 1 HDD/SSD
- Convinient USB-C To Card reader for USB-C/Type-C/Thunderbolt 3 devices to access files from SD/TF card reader, perfect for Photographer or designer,etc
- Aluminiun Case Design(Space Gray), Perfect for New laptops with USB-C Port, such as 2017 Macbook Pro,2015/2016 Retain 12 inch Macbook, Dell XPS 13, HP Spetre X2, etc.
Hdmi Adapter,Connect Adapter,Hd Adapter,Electrical Adapters
CHANGZHOU LESEN ELECTRONICS TECHNOLOGY CO.,LTD , https://www.china-lesencable.com