Production and sales go into China's color TV industry vane

The global giants such as Sony, Toshiba, and LG are shifting manufacturing to China. Panel giants such as BOE and AUO have also increased their industrial layout in China. A series of measures show that China is manufacturing and consuming two-wing operations and becoming a global television leader. The development of the industry.

Careful analysis of the reasons for the growing status of China's TV manufacturing industry, all stem from the industrial transfer of Sony, Toshiba and other manufacturers, that is, although the global flat-panel LCD TV consumer demand continues to rise, but television manufacturers and upstream panel giants are facing downward price and The pressure to reduce costs has forced the transfer of production from South Korea, Japan and other places to mainland China and Taiwan. At the same time, under the drive of the domestic market driven by home appliances to the countryside, trade-in and trade-in, and other countries, foreign brands have begun to focus on planning the value of the Chinese market.

According to the Taiwan Economic Daily, Japanese LCD TV brands such as Sony, Toshiba, Mitsubishi, and JVC are affected by the appreciation of the yen, increasing the proportion of OEMs commissioned by Taiwan, and are expected to be more effective next year. Sony will commission 80% of the commissioned external companies to start the business, double the number this year, and drive Hon Hai’s shipments in TV OEMs by a factor of nine. It will also benefit Wistron, Compal and other vendors. The company's wholly owned subsidiary, "Edmont Holdings," has signed a letter of intent with Philips, Edmond can design, manufacture, purchase, and sell Philips TV products in China. Philips TV has completely become "Chinese goods."

In the Chinese mainland market, Konka and Toshiba Japan have signed orders for 700,000 LCD TV ODMs, including multiple LCD TVs. In the panel area, China is building more panel production lines. BOE's 6th-generation line in Hefei will be officially mass-produced in October; BOE's 8.5-generation line panel plant in Beijing is nearing completion. The Shenzhen Huaxing 8.5 generation panel plant invested by the mainland TV brand TCL, Dachang TCL, including capital investment and project construction, all went smoothly. The main plant structure was partially completed.

Zhao Maojun, deputy director of Ovid Consulting, believes that smaller and smaller profit margins for TVs have forced international companies to outsource a certain percentage of their production to companies like Foxconn, which has greatly increased the proportion of manufacturing outsourcing. “This is not only a consideration of the reduction in production costs, but also includes a comprehensive assessment of factors such as streamlining the supply chain, increasing the speed of market response, and reducing the research and development cycle. This means that China's OEM companies are making full use of their cost advantages to establish a global color TV manufacturing industry. Dominance." Zhao Maojun said.

JP Morgan expects that the output value of the LCD TV OEM market in 2010 will double to 21 billion U.S. dollars from last year, and will increase to 30 billion U.S. dollars by 2011.

The data from the Ministry of Industry and Information Technology also showed a booming production and sales situation. From January to July this year, color TV output increased by 11.1%, of which LCD TVs increased by 36.1%; domestic sales increased by 16.66% year-on-year, of which LCD TVs increased by 54.68% year-on-year.

"The Chinese market is gradually replacing the United States as the world's largest single TV market. At the same time, the upgrading of the color TV market is facing an unprecedented opportunity for expansion." Said Xie Qinyi, vice president of Displaysearch Greater China.

Standard PCB

Printed Circuit Board (PCB) mechanically supports and electrically connects electronic components using conductive tracks, pads and other features etched from copper sheets laminated onto a non-conductive substrate. Components (e.g. capacitorsresistors or active devices) are generally soldered on the PCB. Advanced PCBs may contain components embedded in the substrate.

PCBs can be single sided (one copper layer), double sided (two copper layers) or multi-layer (outer and inner layers). Conductors on different layers are connected with vias. Multi-layer PCBs allow for much higher component density.

FR-4 glass epoxy is the primary insulating substrate. A basic building block of the PCB is an FR-4 panel with a thin layer of copper foil laminated to one or both sides. In multi-layer boards multiple layers of material are laminated together.

Printed Circuit Boards are used in all but the simplest electronic products. Alternatives to PCBs include wire wrap and point-to-point construction. PCBs require the additional design effort to lay out the circuit, but manufacturing and assembly can be automated. Manufacturing circuits with PCBs is cheaper and faster than with other wiring methods as components are mounted and wired with one single part.

Here at BentePCB, Standard PCB means manufacture parameter in General requirements, no special features.


Parameter Definition of Standard PCB as below:

Items

Manufacturing Capabilities

Number of Layers

1-16 layers

Material

FR-4

Maximum PCB Size(Dimension)

650x1200 mm

Board Size Tolerance(Outline)

±0.2mm/±0.5mm

Board Thickness

0.8-1.6mm

Board Thickness Tolerance(t≥1.0mm)

±10%

Board Thickness Tolerance(t<1.0mm)

±0.1mm

Min Trace


 0.1mm/4mil

Min Spacing

Copper Thickness

1oz(35μm)

Drill Sizes (CNC)

0.3-6.3mm

Min Width of Annular Ring

0.15mm(6mil)

Finished Hole Diameter (CNC)

0.3mm-6.2mm

Finished Hole Size Tolerance(CNC)

±0.08mm

Solder Mask

LPI

Minimum Character Width(Legend)

0.15mm

Minimum Character Height (Legend)

0.8mm

Character Width to Height Ratio (Legend)

1:05

Minimum Diameter of Plated Half Holes

0.6mm

Surface Finishing

HASL with lead

Solder Mask

HASL lead free

Immersion gold

Green ,Red, Yellow, Blue, White ,Black

Silkscreen

White, Black, None

Panelization

V-scoring,


Tab-routing,

Tab-routing with Perforation (Stamp Holes)



About Us:

BentePCB is a professional PCB manufacturing which is focus on double side, multilayer, HDI PCB , rigid PCB and Flexible PCB mass production. The company was established on 2011.
We have two factories together, The factory in Shenzhen is specialized in small and middle volume orders and the factory in Jiangxi is for big volume.

Why Us?

UL (E492586), ISO9001,  ISO14001, TS16949, RoHS certified.
Turnover USD 
10-50 million per year.
15,000 sqm area, 450 staff .
Mass Production from single to 
16 layers.
Special Material:
ROGERS, Arlon, Taconic.etc.
Client:
Huawei, SAMSUNG, Malata, Midea,Texas Instruments.etc.


Certification(UL:E492586, TS16949, ISO14001, ISO9001,RoHS):

ISO9001,ISO14001UL:E492586

Factory Tour:

PCB Manufacturer

PCB Factory

PCB Manufacturing

Exhibition:

We Took part in the famous exhibitions over the past years,and got highly appreciation from the top experts,as well as cooperated tightly with them.

Exhibition

Delivery:

BentePCB offers flexible shipping methods for our customers, you may choose from one of the methods below.
Delivery


PCB China

We don`t just sell PCBs .We sell sleep.

Contact Us

Standard PCB

Standard PCB, Printed Circuit Board, Circuit Board, PCB Circuit Board

Shenzhen Bente Circuit Limited , http://www.bentegroup.com

This entry was posted in on