Apple Watch Series 3 users have recently reported an unusual issue with the display. According to a report from 9to5Mac, some owners are noticing strange vertical stripes on the side of their Apple Watch screens. These stripes appear in certain lighting conditions and can be distracting for users who rely on their device for daily tasks.
A photo shared alongside the report shows one user’s Apple Watch with visible lines running along the edge of the screen. The issue seems to affect only the GPS version of the Apple Watch Series 3, though it's unclear if the cellular model is also impacted. Apple has reportedly informed its retail staff and authorized repair centers about this problem, suggesting that it may be related to internal component layout or manufacturing.
The company has advised users to check for the stripes by gently rubbing the edge of the display or blowing air onto the affected area. If the stripes are visible, Apple will replace the watch at no cost. This indicates that the issue is not just a software glitch but rather a hardware-related defect.
While the exact cause of the problem remains unknown, the fact that Apple is offering replacements suggests that the issue is widespread enough to warrant action. Although the cellular version hasn’t been officially mentioned, it’s possible that similar issues could arise in other models as well.
If you own an Apple Watch Series 3 and are experiencing unusual display patterns, it’s recommended to contact Apple Support or visit an authorized service provider. This issue serves as a reminder that even high-quality devices can sometimes have hidden flaws, and it’s reassuring to know that Apple is taking steps to address them.
(Via: ubergizmo.com)
Var v_productid="964423";
Investment Casting II
Investment Casting, also known as lost wax casting, includes wax pressing, wax repairing, tree formation, paste, wax melting, casting metal liquid and post-treatment processes. Lost wax casting is the process of making a wax mold of the part to be cast, and then coating the wax mold with mud. After the clay mold is dried, melt the wax mold inside in hot water. Melt the wax mold out of the clay mold and then roast into pottery mold. Once roasted. Generally, a casting port is left when the mold is made, and then molten metal is poured into the pouring port. After cooling, the required parts are made.
Investment Casting,Lost Wax Casting,Steel Investment Casting,Stainless Steel Investment Casting
Tianhui Machine Co.,Ltd , https://www.thcastings.com