Notre Dame LED lights replace incandescent lamps

Notre Dame LED lights replace incandescent lamps

As one of the landmarks of Paris, the 850-year-old Notre Dame de Paris recently replaced 400 incandescent lamps with energy-saving LED lamps. The entire project was completed by Philips.

Some people may still miss the feeling of dim light in Notre Dame Cathedral, but after replacing the LED lights, people can more clearly see those rose windows and representative statues such as the Virgin Mary and the Son. In the project, two 250W LED spotlights were installed at a distance of 50 meters above the rose window above the two north and south gates. The position of the lamps will not normally enter people's eyes, but the light will directly shine on the rose window. It makes the window look like it will shine.

All the luminaires are connected to the control panel and can be used to create different ambiences through proper regulation. The lighting designer Armand Zadikian said: “The church has two functions, one is religious and the other is cultural. When a religious ceremony is held in a church, tourists visit or perform concerts, the new lighting system can Create a different atmosphere for these activities."

Newly installed LED lighting fixtures can also bring considerable energy savings. By reducing the total wattage from 140kW to 30kW, the lighting efficiency can be increased by a total of 80%. Philips said that only the nave can save 1/5 of energy consumption. In addition, the newly installed LED lamps can reach a service life of 13 years under the conditions of 10 hours per day, which can save maintenance costs and manpower needed to replace lamps.

5.08MM Power+ Signal Power Connector

2.54MM Pitch Signal Power Connector.Chip power connector is used in power module system. It can select the matching power + signal connector according to the need. The feature is that the number of power and signal contacts and the matching sequence can be selected arbitrarily while keeping the connector size and contact core number unchanged.
Plug (male) / socket (female) can be installed at 90 or 180 degrees. It supports mixed or independent combination of signal and power. The quantity range of power and signal is (2-16) pin and (12-128) pin respectively

Product features

High temperature resistant, glass fiber reinforced and flame retardant polyester is used as insulation material

Copper gold composite conductor with high conductivity is used, and the contact area of the conductor is plated with gold
It adopts shrapnel contact, which has the characteristics of integration, small volume, large current carrying capacity, soft plug-in, blind plug-in, self guidance and high dynamic contact reliability. This series of products can be interchanged with FCI's powerblade series and Tyco's multi-beam series

The length of power hole / signal pin can be selected in two sizes. The power rated current is 45A and the signal rated current is 2.5A

5.08MM Power+ Signal Power Connector

ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com

This entry was posted in on