Osram exhibits innovative applications to demonstrate the unlimited potential of LEDs and OLEDs

On June 9th, 2010, OSRAM Opto Semiconductors will participate in the 2010 Taipei International Photovoltaic Week series of events and showcase a series of innovative LED and OLED demonstration products at the LED Lighting Show to highlight the company's strength. Osram's booth is located at booth A1128 of Hall 1 of the World Trade Center in Taipei. In addition to OLED lamps and chandeliers, the exhibits include LED downlights, retrofit lamps, ceiling lamps and display backlights, which will fully demonstrate the enormous potential of LED and OLED applications.

As the world becomes more concerned about environmental protection and sustainability, the use of LEDs in traditional lighting fixtures has grown significantly. At this year's lighting show, OSRAM will focus on the OSLON SSL LED, the industry's smallest 1 W class LED, with an efficiency of over 100 lm through application examples such as downlights, retrofit lamps, ceiling lamps and street lights. Solid state lighting applications.

Another highlight on the OSRAM booth is the component demo board for the Golden DRAGON Plus and OSLON SSL LEDs, which represents OSRAM's cutting-edge fine white light sorting technology on the market. These two types of LEDs are flexible and long-lasting, making them the best choice for indoor and outdoor lighting applications. OSRAM Opto Semiconductors will also showcase an interactive demonstration board covering the entire line of solid-state lighting LEDs from 01.W class Power TOPLED to 10W class OSTAR SMT.

The thin, transparent, and bendable properties of OLEDs bring a new free space to lighting design, but in addition to the field of display backlighting, other application examples are rare. With this LED exhibition event, OSRAM will demonstrate the demonstration application of OLEDs in table lamps and chandeliers, marking a wide range of OLED lighting applications.

TV backlighting modules using OSLON LX LED light sources will also be on display at the OSRAM booth. OSLON LX LEDs produce uniform light in ultra-thin displays and are the best backlight LED solution for TVs and monitors. Also on display is a full-color display application with 6-lead MultiLED.

In addition to a wealth of exhibitions, the "Lighting Place - A New Generation of LED Technology and Solid State Lighting Application Workshop" by OSRAM Opto Semiconductors will be held on June 10th at 1:30 pm, with LED experts introducing the latest LED solutions, LED Light For You partners in the LED application design process in the three major areas of optical, thermal management, electronics considerations.

Cross arms are a kind of angle iron fixed on the telegraph pole,it is a important part for pole the tower, it is used to install insulators and power fittings in order to supporting the wire and lightning conductors, whichsteel Cross Arm make them keep safe distance between them each other by rule. Cross arm is generally installed at 300mm from the top of the pole, and the Insulation Cross Arm should be installed on the receiving side, while the cross arm on the corner pole, the terminal pole and the branch pole should be installed on the guy wire side.

Parameters

cross arm

We warmly welcome friends both domestic and abroad to visit our company, if you have any questions, please contact with us directly.

Cross Arm

Crossed Arms,Steel Cross Arm,Insulation Cross Arm,Cross Arm

FUZHOU SINGREE IMP.& EXP.CO.,LTD. , http://www.cninsulators.com

This entry was posted in on