1. Upload Method: First, you need to configure the communication mode between the PLC and the PG (Programmer). This setup should be done in the S7-300/400 system using the "SETPG/PC" option. Then, in STEP7, create a new project (empty). After that, click on "PLC Upload Station to PG". In the dialog box that appears, set the rack number to 0 and the slot number to 2 (which is the standard configuration). Choose the communication address, which is typically 2. Once this is done, the upload process will transfer the entire station's hardware configuration and software program to the PG. 2. Alternative Methods for Uploading the Program: In the SIMATIC Manager, you can choose the menu option "PLC / Upload Station to PG" or click the upload shortcut button on the toolbar. This will transfer the program from the PLC station to your programmer or computer. The uploaded data includes both the hardware configuration and the user program. Another way is to use the "Name View → Online" option in the SIMATIC Manager to open the online window of the project. From there, you can copy the blocks in the current window to your computer, but this method excludes the hardware configuration. You can also upload the PLC station directly from the hardware configuration interface by clicking the upload button on the toolbar or selecting "PLC / Upload". However, this only uploads the hardware configuration without the user program. It's important to note that for S7-300/400 series PLCs, the hardware information uploaded may be incomplete—specifically, it might not include comments or certain details like module order numbers and parameters. These are usually used for emergency downloads later. Additionally, for S7-300 PLCs, the uploaded hardware configuration includes the expansion rack, but distributed I/O (PROFIBUS slaves) cannot be uploaded.
30L Agriculture Drone,Fertilizer Drone,Gfrp Agricultural Sprayer,Fold Sprayer Drone
Xuzhou Jitian Intelligent Equipment Co. Ltd , https://www.jitianintelligent.com