Overview
CNC lathes, also known as CNC lathes, are multi-disciplinary electromechanical products that integrate mechanical, electrical, hydraulic, pneumatic, and IT technologies. They are manufacturing machine tools. The speed of traditional lathe motor is constant, and the gearbox is used for speed change. The speed range is narrow and the precision is poor. The start-stop shock is large and the failure rate is high, so it is difficult to meet the high-end demand. The application of EN600 products on CNC lathes makes up for the shortcomings of traditional lathes and promotes high-end upgrades. EasyEnergy EN600 adopts an excellent magnetic field orientation control algorithm, which has high control accuracy, fast speed response and superior low frequency characteristics. It has been successfully applied in the high-end CNC lathe industry at home and abroad.
EN600 Series Highlights
1, keyboard upload and download, a key to restore the user parameter settings;
2. The independent wind tunnel design fan has excellent thermal performance and various intelligent detection and protection are complete;
3, There are two application modes of speed and torque, high precision, fast response, superior low frequency characteristics; extensive networking capabilities, has a wealth of peripheral bus expansion, terminal expansion, relay expansion, PG card expansion, analog expansion.
System composition
The CNC lathe uses the EN600 drive spindle solution, which is powerful, highly integrated, and easy to apply. It provides an industrial upgrade to make up for the lack of traditional lathes. EN600 receives the analog signal of the specified speed command of the CNC system in the system, and starts and stops the digital signal of the instruction to realize the stepless speed regulation of the lathe spindle.
Program advantages
Parameter is simple: Set the inverter according to the spindle parameters, easy to operate;
Superior performance: ensure strong cutting force during rough machining, stable speed during finishing, high precision, maximum frequency of 3000HZ, and meet various lathe processing speed requirements;
Linear correction: Analog input curve correction, to ensure that the signal given and the motor speed of the actual linearity of the high degree of agreement, the resolution of the highest frequency of 0.1%;
Strong braking force: special magnetic flux brake and DC braking function can meet the extremely fast deceleration requirements;
Realize positioning: Driving the spindle of the lathe can realize the single point positioning function.
Lithium Battery Pack For Hybrid Electric Locomotive
Lithium Battery For Electric Car,Cylindrical Battery,2000-2500Kw Lifepo4 Battery System,Ce Certificated Lithium Battery
Henan Xintaihang Power Source Co.,Ltd , https://www.taihangbattery.com