Although the millet router MINI can pass through the wall, but in a relatively large coverage environment may not be so well performed, MINI's manual has written support wireless relay, but did not give detailed settings, so here I teach How do you use WDS wireless bridging routing.
First of all, we look at the terminal device after successful connection. We can see that the TP-LINK wireless router is connected to the MINI through wireless bridging, which means that the sub-route can realize wireless bridging with only one power cable.
The bridging method is very simple. First, we enter the background of the sub-route (that is, the route with the MINI bridge). This article uses the TP-LINK series as an example. First, click the left-hand side to manage the network parameter - LAN port setting, and then change the IP address. In the same network segment as MINI, convenient for future management, be careful not to conflict with MINI and other device IP.
After setting up, the router will restart. After restarting, the router will automatically jump to the management page of the new IP address and request to re-enter the account password to log in. If there is no automatic change, manually enter the set IP address into the background. After re-login we select the wireless settings - basic settings, and then follow the instructions in the figure to operate, set the end of the "Save" button.
 Â
After saving the settings, we go to Wireless Settings - Wireless Security Settings, and set a password that is the same as MINI to facilitate seamless bridging. Remember to save after the same settings.
Then we go to the DHCP server - DHCP service settings, where the DHCP service has to choose "start", otherwise it may not be able to obtain IP, address pool start and end settings to be consistent with the MINI DHCP address pool, MINI is from 192.168.33.100 , then we set the scope of 192.168.33.10 ~ 192.168.33.99, as long as there is no conflict on the line, then the gateway to be set to MINI, usually 192.168.33.1, DNS server settings on demand, this background management in the MINI and The device connected to the MNI can be obtained. The network operator should also provide it. If none is available, enter the gateway IP address or 8.8.8.8.
After the setup is complete, we return to the "operational state" and you can see that the WDS connection is successful. At this point, the wireless bridge has been completed and the network is normally connected.
Recommended installation butler sofa, download address: http://app.shafa.com/
Top Apps Recommended: HDP Live Dragons Live Live Edge Landlords One-click Cleanup Sky Teak Phoenix Song Weather Dragon Ball Hit
First of all, we look at the terminal device after successful connection. We can see that the TP-LINK wireless router is connected to the MINI through wireless bridging, which means that the sub-route can realize wireless bridging with only one power cable.
The bridging method is very simple. First, we enter the background of the sub-route (that is, the route with the MINI bridge). This article uses the TP-LINK series as an example. First, click the left-hand side to manage the network parameter - LAN port setting, and then change the IP address. In the same network segment as MINI, convenient for future management, be careful not to conflict with MINI and other device IP. After setting up, the router will restart. After restarting, the router will automatically jump to the management page of the new IP address and request to re-enter the account password to log in. If there is no automatic change, manually enter the set IP address into the background. After re-login we select the wireless settings - basic settings, and then follow the instructions in the figure to operate, set the end of the "Save" button. Â Â
After saving the settings, we go to Wireless Settings - Wireless Security Settings, and set a password that is the same as MINI to facilitate seamless bridging. Remember to save after the same settings. Then we go to the DHCP server - DHCP service settings, where the DHCP service has to choose "start", otherwise it may not be able to obtain IP, address pool start and end settings to be consistent with the MINI DHCP address pool, MINI is from 192.168.33.100 , then we set the scope of 192.168.33.10 ~ 192.168.33.99, as long as there is no conflict on the line, then the gateway to be set to MINI, usually 192.168.33.1, DNS server settings on demand, this background management in the MINI and The device connected to the MNI can be obtained. The network operator should also provide it. If none is available, enter the gateway IP address or 8.8.8.8. After the setup is complete, we return to the "operational state" and you can see that the WDS connection is successful. At this point, the wireless bridge has been completed and the network is normally connected. Recommended installation butler sofa, download address: http://app.shafa.com/
Top Apps Recommended: HDP Live Dragons Live Live Edge Landlords One-click Cleanup Sky Teak Phoenix Song Weather Dragon Ball Hit