A recently introduced LED module is a two-piece design that mimics a traditional pedestal and is easy to install. The module contains a base or part of the lamp holder that is permanently attached to the light source. The components of the lamp can be pushed into the base to energize, and there is also a right angle rotation to fix.
Electronics, optics and lighting technologies are revolutionizing the way LED lighting is being changed.
Advanced LED lighting technology now provides design manufacturers (OEMs) with high-life and flexible design LED luminaires for residential, commercial and industrial lighting. However, despite its many advantages, LED technology has its own inherent shortcomings. For example, although LED lamps generate less heat than incandescent lamps, the effective life of LED lamps may be greatly reduced due to junction heating without proper heat sinking. On the contrary, if the heat treatment is proper, the LED lamp can be used for 50,000 hours under normal use conditions.
led light source is typically soldered to a printed circuit board and integrated light fixture assembly, the replacement of broken or LED LED updating is difficult. This type of assembly poses many challenges for manufacturers, making luminaire manufacturing more like electronics assembly than assembly of lighting fixtures.
In fact, the LED lighting industry has been integrated into the field of electronic components, which requires a variety of professional technologies that were not available before, so the development of led products has been slow from the beginning. At the beginning, the LED lighting industry did not invest heavily in the manufacture of LED luminaires because it was not easy to assemble, difficult to repair, and difficult to update. Manufacturers accustomed to traditional luminaire manufacturing are still using traditional models to make LED luminaires. In order to deal with these problems in practical applications, some manufacturers began to integrate electrical, thermal and optical technologies with internal lighting and production capacity. Advances in electronic technology for the first time with the led lights can be large-scale production.
A recently introduced LED module is a two-piece design that mimics a traditional base and is easy to install. The module contains a base or part of the lamp holder that is permanently attached to the light source. The components of the lamp can be pushed into the base to energize, and there is also a right angle rotation to fix.
This modular assembly can have different floodlight forms so that various display effects can be accurately represented in practical applications. The user can freely change the angle, temperature or light output of the beam without moving the luminaire. You can change the display of light by simply disconnecting the module. With such a simple LED lighting module design, lighting manufacturers can easily produce low-cost LED products that are easy to install and do not need to be updated. Designers can use these modular designs to develop easy-to-replace and upgrade led light sources , which can reduce the payback period for solid-state lighting.
Other applications for such modular assembly include spotlights, work glares, spotlights, track lights, ceiling trough lights, display lights, building lighting, decorative lights, and museum lighting.
As LEDs become more widely used, lighting control systems can be effectively combined with network equipment to reduce energy consumption and enable end users to control lighting. Intelligent lighting control is simple and reduces carbon emissions. New network systems for commercial, industrial and residential buildings are being connected to their lighting systems for local area maintenance for maintenance inspection, control of the number of lights used, and daylight control and dimming, which is also Technology is a simple and effective way to reduce LED energy consumption.
LED Business Network led to focus on e-commerce platform to promote led enterprises + Internet, the official website URL: http://
Normal Submersible Motor Winding Wire
This products is made of oxygen-free copper, covered by modified polyethylene jacket. It has fine performance for water-resistant, electric conducting and mechanical strength. It used to all types water-filled submersible motor or similar working electronics, and applied to standard of environmental-friendly.
The conductor is used the standard of GB/T395 or GB/T6109, and applied to JB/T4014 standard.
The product can be used for Voltage 380V, temperature -10℃-70℃, PH value 6.5-8.5, water pressure 1MPa, frequency 50Hz-60Hz, for long time use with stable liability.
Normal Submersible Motor Winding Wire,Winding Wire Of Submersible Motors,Water Filled Submersible Motor Winding Wire,Submersible Rewinding Wire
HEBEI GUOQIAN WIRES CO., LTD , https://www.guoqianwires.com