Summer summer came quietly and left sweating.
Yeah, heatstroke, yeah, drowsy,
I really want to go to the Arctic ~
The temperature in summer soars. Are you okay with your cell phone?
In the old days of using mobile phones in the past, there have been cases where mobile phones have become hot. Especially in the summer, the handshaking machine's appearance is comparable to that of roast trotters. What's more, the sweat in the palms of the hand is very violent.
Come, don't worry, eat watermelon in the ice, and talk to your cell phone about fever.
Why is the phone hot?
As we all know, mobile phones belong to electronic products. When electronic products work, they will generate some heat, plus the high temperature in the summer, so the body temperature of our body is relatively high.
In addition, there are several reasons why mobile phones are hot:
1. Chip fever: The mobile phone processor is a highly integrated SOC chip. When the mobile phone is working, these chips and modules will operate at high speed and naturally emit a lot of heat.
2. Usage habits: Long-term use of mobile phones, mobile phones while running too much software and playing mobile phones when charging will cause fever;
3. Environmental factors: Use of mobile phones in high-temperature outdoor environments, such as sun exposure and sweating
4. Mobile phone charging: During the charging process, the power supply circuit has a resistor at work, resistance and current play each other, and fever is inevitable.
5. Mobile Phone Case: Using an inappropriate mobile phone case causes the phone to lose its heat;
6. Phone failure: The phone's circuit board or the battery has failed
Mobile phone does not heat normal?
Cell phone fever is always troubled by many small partners, but Xiao E here to tell everyone, mobile phone fever is inevitable, as long as the temperature control within a certain range is normal, not fever but pay attention.
Because the phone does not heat does not mean that there is no heat inside the phone, it is likely that the lack of internal heat graphite patch or its poor thermal conductivity, resulting in heat accumulation in the phone can not be caused by heat dissipation, this may be due to the long-term high temperature inside the phone The internal components of the phone cause some damage. So, we still have to analyze the specific situation.
Avoid cell phone fever coup
Coup 1: Turn off the background application that is not used temporarily
Small E recommends not using mobile phones at the same time to open too many applications, generally 3 or less is appropriate. If it is a large application, such as games, videos, etc., it is recommended to run only one.
Click the virtual button in the lower right corner of the screen to select a single application to close, or click the trash to close all background applications.
Coup two: reduce the number of startup applications
The principle of self-starting of mobile phone applications is the same as that of computers. In addition to slowing down the boot speed, the mobile phone application will increase the CPU load, which will cause the phone to heat up.
Click [Mobile Manager]> [Start Management], small E recommends that you open [all automatic management], so that the background of the mobile phone can automatically identify application scenarios, prohibit unnecessary application startup, and will not affect the timely acceptance of new messages ~
Coup 3: Turn off Always Connect to WLAN
Connecting to a WLAN when using the lock screen is also unnecessary.
Click [Settings]> [Wireless and Network]> [WLAN]> [Configuration]> [Keep WLAN connected while sleeping]> [Only when charging]. After the setting is complete, when the screen is turned off for 18 minutes, the WLAN is no longer connected, and the WLAN connection is restored after the screen lights up.
Mobile phone overheating treatment
1 temporarily shut down: If the phone overheats, must stop using, shut down temporarily, and shut down immediately, until the mobile phone temperature is normal and then boot;
2 after-sales testing: If the phone is still hot serious, it is only sent to after-sale testing, non-professionals are prohibited to disassemble the phone.
Our company specializes in the production and sales of all kinds of terminals, copper terminals, nose wire ears, cold pressed terminals, copper joints, but also according to customer requirements for customization and production, our raw materials are produced and sold by ourselves, we have their own raw materials processing plant, high purity T2 copper, quality and quantity, come to me to order it!
LYF Copper Lube Terminals,Ring insulated terminals
Taixing Longyi Terminals Co.,Ltd. , https://www.longyicopperlugs.com