Finishing machine

species

The existing finishing machines mainly include mobile finishing machines, centrifugal finishing machines, and barrel finishing machines.

effect

The so-called finishing machine is a machine that performs surface treatment such as polishing and deburring on a workpiece.

Need to pass a medium, commonly known as abrasive. It is a kind of synthetic inorganic compound with various types and different styles. It is mainly determined according to the processing of workpieces of different shapes and sizes.

Magnetic finishing machine

principle

The magnetic finishing machine is used to conduct fine grinding of stainless steel needles, generate high-speed flow, turn heads and other actions, and achieve precise grinding effects such as polishing, cleaning and removing burrs in the inner hole and surface friction of the workpiece.

Features:

1. Finished parts of light iron metal, non-ferrous metal, hard plastic, etc., remove the rough edges, chamfers, burrs, polishing, washing and other precision grinding work

2. Irregular parts, holes, tubes, dead ends, cracks, etc. can be ground

3. Fast processing speed, simple and safe operation, low cost

4. The finished product is not deformed after processing, and does not affect the accuracy.

5. The machine is complete, and can be designed for special models.

use:

1. Remove the rough grinding

2. Removal of oxide film work

3. Polished surface finish

4. Corrosion removal treatment

5. Sintering black trace treatment

6. Polishing and polishing work

Vibrating finishing machine

The machine is a vibration excitation motor to generate a vibration source, so that the working cylinder body produces a three-way vibration working principle. The vibrating motor is equipped with an eccentric weight on the upper and lower sides. When the vibration motor rotates at a high speed, the exciting force generated by the two eccentric blocks changes in the circumferential direction in the horizontal plane, so that the body generates a circular motion in the horizontal plane, and at the same time, the exciting force does not pass through the center of mass of the body. Therefore, a tilting excitation torque is generated to cause the cylinder to oscillate about the horizontal axis. Since the bottom of the cylinder has a circular shape, the amplitudes of the points are inconsistent. The shaped grinding block and the workpiece in the cylinder are revolved both in the vertical central axis and rolled around the center of the ring, and the combined motion is a circular spiral motion. At the same time, the cylinder has a spiral rise, and the shaped grinding block and the workpiece slide along the spiral surface. The friction between the workpiece and the shaped grinding block is increased, and the finishing efficiency is improved. In order to reduce the wear of the grinding block and the workpiece during work, the noise is reduced, and the inner wall is lined with wear-resistant rubber or polyurethane. To reduce noise, a noise reduction cover can also be added.

Features:

1. Using the vibration deviation generated by the inertia exciter (vibration motor), the machine moves in the three-dimensional plane, so that the workpiece and the abrasive run in one direction and rub against each other to achieve the effect of treating the surface.

2. It is suitable for the finishing and finishing of large quantities of medium, small and large-sized parts. The treatment effect is good and it takes a long time. (Deburring effect is good)

3. The processing process does not destroy the original size and shape of the part, and is suitable for workpieces that are afraid of collision.

4, easy to operate, in the course of work, you can check the processing of parts at any time, equipped with PLC control box, can achieve unmanned operation.

5. The container lining is made of PU material (polyurethane).

6, equipped with a discharge device, using the forward and reverse operation of the motor, through the equipped screening equipment, the abrasive is separated, the workpiece is automatically discharged.

Mobile finishing machine

Features:

1. Adopt the speed-regulating motor to drive the tray and run in the horizontal direction.

2. The main difference between the mobile finishing machine and the vibrating finishing machine is the need to add water to grind. The processing time is extremely short, the efficiency is 10 times that of the vibrating finishing machine, and the effect is not as good as the vibrating finishing machine.

3. The processing process does not destroy the original size and shape of the part. Because of its fast speed, it is suitable for workpieces that are not afraid of collision.

4. Convenient operation, the speed regulating motor can adjust the working speed freely through the electromagnetic governor or the frequency converter. The machining condition of the parts can be checked at any time. It is equipped with a PLC control box, which can automatically discharge and realize unmanned operation.

5. The container lining is made of PU material (polyurethane).

6. After the processing is completed, the main body of the machine can be tilted, the workpiece and the abrasive are all poured out, and the abrasive and the workpiece are separated by a screening device.

Centrifugal finishing machine

Features:

1. Using the brake motor, use the belt to drive 4 small buckets and make circular motion in the three-dimensional plane. 2. Each small barrel is sealed, there is no gap, and the pressure is high. With a speed of 200 rpm, it is the most efficient of all finishing machines. (good polishing effect)

3, usually used for mirror polishing, often used in the surface treatment of glasses, jewelry and other products.

4. Easy to operate, the brake motor can adjust the working speed freely through the inverter. The disadvantage is that you can't check the processing effect at any time. Only the overall shutdown can be viewed.

5. The inner lining of the barrel is made of PU material (polyurethane).

6. After the processing is completed, open each bucket cover separately and press the discharge button to automatically discharge.

Roller finishing machine

product manual:

The horizontal rotary drum is used, and the inner lining of the barrel is divided into different linings. The function of the barrel is different. The inner barrel is covered with PU glue, which is resistant to acid and alkali, wear-resistant, and can prevent workpiece collision; the barrel is not covered with lining, suitable for steel balls. Or steel products, because it can strengthen the cutting force, promote greater effect; the barrel can be arbitrarily rotated, with appropriate slope, the following materials are convenient.

Features:

The most economical polishing machine for the grinding and polishing machine series, the simplest and most convenient model.

This machine is suitable for forging, casting, sanding work with strong cutting force; grinding work for black film, blackhead and fine grinding, chamfer polishing.

The barrel polishing machine is divided into a hexagonal/octagonal barrel polishing machine, a right angle barrel polishing machine, and an olive type barrel polishing machine.